UVR-N1特性
一、一机三用：可以测量照度值、最大感光度波长以及累计照射量，探头有三个种类，可以根据不同波长选择合适的探头。
二、可延长设计：该机器使用了可延长工艺设计，可以让探头离开机身进行测量。
三、放热盖板：耐热金属机身，可以直接放入普通传送型UV照射装置上一同进行传送。
This container is the UV checker used for the lamp strength management of use UV (ultraviolet rays) irradiation device, which is used for seals of an electric machine and electronic parts, adhesion and drying and the mounting lines of the PC board.
The productivity will be improved if the measurement of this device is used for management for speed of conveyer and the strength distribution and changing time of lamp.
| １ |
Heatproof design with metal body
UV strength at metal Highland lamp 300W/cm transportation speed 3m/min can be
measured with a general conveyer type UV device.
|
| ２ |
Two roles per one
Peak strength and the liquidation quantities of light can be measured at the same time.
|
| ３ |
Analog output
It is convenient for the strength distribution measurement on the UV irradiation side.
|
| ４ |
possible to connect with the computer
It is possible to connect it with the computer by using an optional
accessory RS-232C cable.
|
|
| Specifications |
Measurement wave length
|
300～390nm |
Peak sensitivity wave length
|
About 350nm |
Radiation strength
(peak strength)
mW/c㎡ |
Range１
Range２
Range３ |
Range
0.02～60.00
0.2～60.00
2～6000 |
Amount of multiplication irradiation
mJ/c㎡ |
Range１
Range２
Range３ |
Range
0.02～999.99
0.2～9999.9
2～99999 |
Analog output
Discharge strength of 1mV
(unit: MW/c㎡)
|
Range１
Range２
Range３ |
0.03
0.3
3 |
Size
|
About 202×75×16(no cover to prevent heat/on mounting of the light receiving device)
About 209×83×16(cover to prevent heat/on mounting of the light receiving device)
|
| Weight |
Four alkali AAA batteries
Temperature 10℃～60℃/humidity under 85%R.H . (in case of no dew)
|
Power supply
|
Four alkali AAA batteries |
Using condition
|
Temperature 10℃～60℃/humidity under 85%R.H . (in case of no dew)
| |
产品详细介绍
当前位置：
